Innovative Firmware Algorithm
- Innovative Firmware Algorithm
- DRAM-less, 100% data integrity
- Excellent random performance
- Wide Temperature: -40℃~85 ℃
- Supports TRIM/NCQ/SMART
- Built in iData Guard
The Innodisk CFast 3ME2 operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 440MB/s. and of sequential write up to 150MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. CFast 3ME2 is featured as small form factor, and suitable for most industrial application.
CFast 3ME2 can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3ME2 support hardware write protect to prevent modification of valuable data on a device.
Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3ME2 prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.
|Model Name||CFast 3ME2|
|Interface||SATA III 6.0 Gb/s|
|Sequential R/W (MB/sec, max.)||440/150|
|Max. Power Consumption||1.1W|
|Thermal Sensor||ST- Optional / WT- Default|
|H/W Write Protect||Optional|
|Dimension (WxLxH/mm)||42.8 x 36.4 x 3.6|
|MTBF||>3 million hours|
|Storage Temperature||-55°C ~ +95°C|
|Operation Temperature||Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C
NAVRHNEME VÁM ŘEŠENÍ NA KLÍČ
Hledáte technologického partnera? Neváhejte se na nás obrátit.