Barco NX4s představuje vysoce výkonný vnitřní LED displej, který nabízí nejhlubší úrovně černé, extrémně vysoký kontrastní poměr více než 3 500:1, světelný výstup více než 2000 nitů a nativní 16-bitové zpracování barev. NX4s přináší nejvyšší kvalitu obraz



Black and bright
Deepest level of black thanks to the use of black silicon resin instead of the traditional white epoxy
Light trap shader design
Phenomenal contrast ratio of 3,500:1

Seamless and lightweight
Carbon fiber structure
Designed in a framework - rather than a box
Strong and light support system that is resistant to deformation along all three structural axes (x, y and z)
Weight of only 57kg/sqm including structure and cables (21% less than ILite 6XP)

Consistent uniformity over time
Extremely high brightness levels, thanks to the use of highly efficient LED chips and lower LED temperatures
Slow aging process of the LED and greater degree of reliability in humid operating conditions, thanks to the use of silicon instead of epoxy resin
Exceptional display stability and uniformity over time thanks to 'tri-color' LED calibration

Brilliant colors, breathtaking grayscales

16-bit processing and new “tri-color” calibration on all three colors
New levels of color depth (281 trillion colors), uniformity, and grayscale
Vibrant images with deep, uniform colors across the entire display surface thanks to a tight selection of LEDs and 16- bit processing power - the color triangle of the NX4s is actually wider than the HDTV standard

Get creative
Small modular design
Tiles can be both used as a standard integrated display or a seperate display for creative designs.
Possible to use in any shape or form (when combined with Barco Director Toolset)

Remove the tools, improve the serviceability
No tools or cables needed to set up and secure an NX4 LED wall or take it apart for service
Easy access to every module, the control unit and interface boards
Easy removal and replacement of shaders when damaged


Pixel pitch 4.66 mm
Brightness 2,000 nits
LED configuration 3-in-1 black SMD
Pixel density 45,918/sqm
  10,368/tile (96x108)
Viewing angle H: 120°
  V: +60°/-60° (@ 50% brightness)
Contrast ratio 3,500:1
Lifetime 60,000 hours @ 75% brightness
Power consumption 244 W/tile (max)
  109W average
Tile size (WxHxD) in mm 448mm (17.6") x 504mm (19.8") x 210 mm (8.27") (rental)
  448mm (17.6") x 504mm (19.8") x 228.6mm (9") (fixed)
Weight / Tile 12.9 kg (28.4 lbs) (rental)
  13.8kg (30.3 lbs) (fixed)
IP rating Indoor use only
Processing 16 bit/color
Colors 281 trillion
Refresh rate 3,200Hz
3D ready (optional) yes
Max. stacking Max. 12 tiles high
Max. hanging Max. 15 tiles high
Interfaces 4x HDMI link
  1x USB (diagnostic)
Serviceability Front and back (tools required for front)
Source compatibility CVBS, YC, YUV, RGB, DVI (Single and Dual link , up to 2048x1536)
  SDI. HD-SDI, Dual link HD-SDI
Operatable digitizer DX-100, DX-700 (with NNI output card)
Certifications CE class A, TUV, FCC Class A, ETL, Cebec, RoHS
3D capability Yes


Ke stažení


Hledáte technologického partnera? Neváhejte se na nás obrátit.

šipka nahoru